HK P7 PSP Walnut Chkrd/Txtd PistolGrips WithO LOGO FOR PROTRUDING MAG RELEASE U4

November 12, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE PROTRUDING MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the flush mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. NOTE: PER THE HK OPERATORS’ MANUAL YOU MUST REMOVE YOUR PISTOL’S SLIDE BEFORE INSTALLING ANY NEW GRIPS. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. The left hand grip has an imperfection in the wood – an indent at the top of the grip. SEE PHOTO FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkd/Txtrd Pistol Grips FOR FLUSH MAG RELEASE ONLY! NO LOGO U2

November 11, 2025 admin More

These are beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE FLUSH MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the protruding mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. They complement blued or stainless guns equally well. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. This set has a unique grain pattern and. The right hand grip is darker than the left hand grip – SEE PHOTOS FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkd/Txtrd Pistol Grips FOR FLUSH MAG RELEASE ONLY! NO LOGO U1

November 11, 2025 admin More

These are beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE FLUSH MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the protruding mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. They complement blued or stainless guns equally well. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. This set has a unique grain pattern and. The wood used for these grips has slight indents in the grain – SEE PHOTOS FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkrd/Txtd PistolGrips WithO LOGO FOR PROTRUDING MAG RELEASE U2

November 7, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE PROTRUDING MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the flush mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. NOTE: PER THE HK OPERATORS’ MANUAL YOU MUST REMOVE YOUR PISTOL’S SLIDE BEFORE INSTALLING ANY NEW GRIPS. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. These grips have a unique grain pattern and indents in the grain on the left hand grip. SEE PHOTO FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkrd/Txtd PistolGrips WithO LOGO FOR PROTRUDING MAG RELEASE U3

November 6, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE PROTRUDING MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the flush mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. NOTE: PER THE HK OPERATORS’ MANUAL YOU MUST REMOVE YOUR PISTOL’S SLIDE BEFORE INSTALLING ANY NEW GRIPS. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. These grips have indents in the grain on both grips. SEE PHOTO FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkrd/Txtd PistolGrips WithO LOGO FOR PROTRUDING MAG RELEASE L

November 5, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE PROTRUDING MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the flush mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. NOTE: PER THE HK OPERATORS’ MANUAL YOU MUST REMOVE YOUR PISTOL’S SLIDE BEFORE INSTALLING ANY NEW GRIPS. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are representative of what you will receive. Since Nature produces the wood, the grain and coloring of each pair will vary. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Chkrd/Txtd PistolGrips WithO LOGO FOR PROTRUDING MAG RELEASE U1

November 4, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE PROTRUDING MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the flush mag release. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered and textured within a sharply defined border, with the portion outside the border left smooth. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. NOTE: PER THE HK OPERATORS’ MANUAL YOU MUST REMOVE YOUR PISTOL’S SLIDE BEFORE INSTALLING ANY NEW GRIPS. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the grips you will receive. These grips have a unique grain pattern and a blemish on the right hand grip. SEE PHOTO FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking out my listings.

HK P7 PSP Walnut Checkered Pistol Grips FOR FLUSH MAG RELEASE ONLY! W-LOGO L

October 27, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE FLUSH MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the protruding mag release. These are stunning grips made of fine English walnut, with beautiful grain patterns and coloring, and the finest quality machining. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered within a sharply defined border, with the portion outside the border left smooth. The HK logo is present on the lower portion of each panel. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are representative of what you will receive. Since Nature produces the wood, the grain and coloring of each pair will vary. The item will be carefully packed to protect it. Thank you for checking our listings.

HK P7 PSP Walnut Checkered Pistol Grips FOR FLUSH MAG RELEASE ONLY! W-LOGO U

October 23, 2025 admin More

These are some beautiful fine walnut grips for the for HK (Heckler & Koch) P7 PSP semi-automatic pistol WITH THE FLUSH MAG RELEASE ONLY – these are NOT for the M8 or M10/M13 models or the PSP models with the protruding mag release. These are stunning grips made of fine English walnut, with beautiful grain patterns and coloring, and the finest quality machining. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered within a sharply defined border, with the portion outside the border left smooth. The HK logo is present on the lower portion of each panel. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. You are purchasing ONE pair of grips for the price shown in this listing. The grips shown in the photos are of the ones you will receive. This set has a unique grain pattern – there are indents in the grain on the left hand grip. SEE PHOTOS FOR DETAILS. The item will be carefully packed to protect it. Thank you for checking our listings.

HK P7 PSP Walnut Checkered Pistol Grips WithLOGO FOR FLUSH MAG RELEASE ONLY! NEW

July 30, 2021 admin More

HK P7 PSP Walnut Checkered Pistol Grips WithLOGO FOR FLUSH MAG RELEASE ONLY! NEW

These are stunning grips made of fine English walnut, with beautiful grain patterns and coloring, and the finest quality machining, all made in the USA. These are not stained, and the beauty of the natural wood is thus visible to see in what is one of our finest grips. The fit is very precise, and when installed will enhance the appearance of your firearm. The grips are polished to achieve a tremendous glossy surface that brings out the true grain of the natural wood. The grips are then checkered within a sharply defined border, with the portion outside the border left smooth. There is an HK logo on these grips as the photos show. Please see our other grips for different styles. These grips are easily installed, with your original grip screw and backside cuts used to correctly locate them on your gun prior to securing them. A set of “star” washers are included if you wish to use them under your existing grip screws. These grips are simply outstanding when fitted to a gun, and there aren’t any photos that really do these grips justice as they are simply beautiful. The grips aren’t varnished, but finished with a fine oil to enhance the beauty of the wood and preserve it as well. Whether your gun’s finish is black/blued or stainless/silver in color, these will add that special touch, as no two sets of grips have exactly the same grain. The look of these on a stainless or blued gun is outstanding. These are ONLY for the HK P7 PSP pistol models listed above and do not fit the M8 or M10/M13 versions of the P7. They are NOT for the any other models from HK or otherwise (see our other listings for additional HK grips). It is up to you to be sure these are appropriate for your gun. If you’re not sure, ASK! Know your gun’s model, as we will require such info to help you. These grips are not returnable. NOTE: Per the HK P7 Operators Manual, the slide must be removed from your gun before installing any other grips. Failure to do this will result in your grips being damaged when the gun is cycled or fired. We include two notes inside your grip package to remind the installer of this important installation step. They are beautifully made, and the pictures can’t truly show the beauty of these grips. The detail of the grain stands out because these aren’t stained, so the natural beauty of the wood shines through. The photos that may show a’redder’ grip (1st & 3rd photos) were taken with a camera flash to clarify the detail; the flash makes the grips appear redder than normal; the grips are actually more brown as shown in the other photos. If you’re looking for other versions (including checkered or stippled grips) or for grips for other firearms, please see our other listings. These are for either left- or right-handed shooters, as there is no distinct thumb rest on either side’s grip panel. They complement blued, plated or stainless guns equally well. Some fitting of the grips to your gun may be needed as our multiple examples of this specific model has shown frame dimension variations. Pair of grips for the price shown in this listing. We have a limited number of these sets, and the grips shown in the photos are representative of what you will receive. Since Nature produces the wood, the grain and coloring of each pair will vary. The item will be carefully packed to protect it. Thank you for checking our my listings. We reserve the right to correct errors or omissions in this listing. The item “HK P7 PSP Walnut Checkered Pistol Grips WithLOGO FOR FLUSH MAG RELEASE ONLY! NEW” is in sale since Saturday, May 15, 2021. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol”. The seller is “mazdaman4″ and is located in United States, United States. This item can be shipped to United States.

For Gun Make: HK P7 Flush Mag Release ONLY
Model: P7 PSP w/Flush Mag Release ONLY
Country/Region of Manufacture: United States
Specific Part: Grip Set
Bundle Listing: No
Type: Grip Parts
Material/Finish: English Walnut
MPN: Does Not Apply
For Gun Model: P7 PSP w/Flush Mag Release ONLY
Brand: GRIPS4U.NET

November 2025
M	T	W	T	F	S	S
« Oct
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30